Welcome to
CEL Scientific Corporation
Sampling Box
Terms and conditions
Copyright © 2006 CEL Scientific Corporation. All Rights Reserved.
Always Remember:

>    Store Tedlar bags in a clean area away from
potential contamination sources.
>    Flush with purified air or nitrogen before use.
>    Never fill the bags more than 90% capacity.
>    Use a trip blank filled with zero air.
>    Do not ship Tedlar bags by air in
unpressurized cargo cabins.
>    Do not use bags to collect unstable or highly
reactive compounds or hazardous waste.
International Customers:

Shipping rates will not be given during check out. In
order to give the best possible rate, actual shipping
costs will be added later. If you need a shipping
quote, please use our
Order Form before ordering.

Payment in advance is required for all international
orders. If you would like to pay by PayPal or wire
transfer, please call us at 1-800-214-0845 or email
to
customerservice@celscientific.com for our
account information.
If you wish not to use your credit card to make a purchase, click here to fill out our order form OR call
us at +1-800-214-0845
OR  fax your order to +1 (562)309-0167.
FREE  UPS Ground Shipping for Gas Sampling Bags of Tedlar, Kynar or Foil Film on orders over $200!*
*Shipping cost will be removed after the order is placed, before charges are applied to your card. Applies to UPS
Ground shipping within the continental 48 U.S. States only.
Features

> Three easy-to-operate buttons
> Fills bag without sample passing through pump   
> Automatic-stop function to prevent overfill
> Maximum Vacuum: 28" Hg (380" H2O)
> Collects over 100 samples with a full battery
> Purge function to flush bag
> Accommodates 0.5L – 2L sampling bags
> Clear-view lid
> Storage room for accessories
> Size: 12.5"L x 12"W x 6.5"H
> Weight: 8.5 lbs
Operating Instruction (Also available in PDF Form)
1. Press the power switch to turn on the power.
2. Open the clear-view lid.
3. Place a
Tedlar bag inside the sampling box and attach its eyelet to the fixing pole.
4. Connect the flexible tubing inside the box to the stem of the valve of the bag.
5. Open the valve and close the sampling box.
6. Press “SAMPLE” button on the control panel to start sampling.
7. Sampling stops automatically when the bag is full.
8. Open the lid in 6~8 seconds, close the valve of the bag, and remove the bag from
the box.
9. If a bag needs to be flushed, press the “PURGE” button. When the bag is empty,
press the “STOP” button.
Clear-view Lid---------------
--------------Tedlar Bag
SAMPLE---------------
STOP-----------------------------
PURGE--------------------
Fixing Pole------------------
-------------------Charging Port
-----Power Switch
Soil Gas Inlet------------
CEL Vacuum Air Sampling Box - Fully Automatic!
$1299.00
Video Tutorial
Home
13824 Bentley Place
Cerritos, CA 90703, USA
Tel:  +1 (800) 214-0845
Fax: +1 (562) 309-0167